Nu-EcoSafe Degreaser

Water-Based Heavy Duty Cleaner

Nu EcoSafe Strip Industrial High Strength Degreaser is a heavy duty cleaner that is biodegradable, user-friendly and environmentally safe. It is extremely effective for commercial, residential, automotive and the marine industry.

Super Concerntrated Formula

Nu EcoSafe Strip Industrial High Strength Degreaser has the following qualities:

  • Quickly cuts through grease, industrial soils and petroleum-based liquid products
  • Can be used as a Varsol® and solvent substitute; it’s power and versatility will tackle all of your cleaning and degreasing needs
  • Is safe for use in parts washers, steam cleaners and hot or cold pressure washers
  • Will replace many specialized cleaning and degreasing products.

Nu EcoSafe Strip Industrial High Strength Degreaser is suitable for the following projects:

  • Concrete driveways
  • Garage floors
  • Engine & Machinery parts
  • Wheels & Rims
  • Shop walls
  • Lockers
  • Barbecues
  • Stove tops
  • Lawn mowers
  • Chain saws
  • Saw blades
  • Tools
  • Fireplaces

Nu EcoSafe Strip Industrial High Strength Degreaser has the following qualities:

  • Water-based
  • Biodegradable
  • Non-flammable
  • Non-abrasive
  • No phosphate or Chlorine
  • Contains no TAPs or HAPs (Toxic/Hazardous Air Pollutants)
  • Easy clean up with running water
  • Non ozone depleting
  • As quick as conventional products

 

Application Guide

Equipment

Brush or broom application. Plastic watering can, hand sprayer, pump style garden sprayer or chemical applicator. Adequate safety equipment including gloves and safety glasses.

Preparation

Ensure that all surfaces are dry and remove all loose material.

Dilution

For oil-contaminated concrete: do not dilute. For general purpose cleaner: 1 part Nu-EcoSafe Degreaser to 4 parts water. Adjust as necessary.

Test Area

Test on a small, inconspicuous area. Check time required and dilution rate. Check suitability of the substrate.

Application

Apply liberally to surface and scrub in using a broom or brush. Wash off with water. For best results use a high pressure washer.

Clean Up

Use generous amounts of water. Wash vertical surfaces from the top down. Best results achieved with high-pressure wash.

Safety Precautions

Avoid ingestion, skin and eye contact. Wear eye protection and rubber or synthetic gloves.

When applying product using spray applicators wear NIOSH approved respirator. In case of eye or skin irritation, flush with cold water for 15 minutes. If swallowed do not induce vomiting, seek immediate medical attention.

Dispose of product in accordance with applicable environmental regulations. When using the soap injector line of a pressure washer, be sure to measure dilution ratios according to the setting of the intake valve.

Nu-EcoSafe Degreaser
Quick Reference

Appearance:

Transluscent Orange Liquid

pH:

> 13.0

VOC Levels:

46.8 g/L

Coverage Rate:

1 - 12 m2/L

Properties

Biodegradable

Low VOC

Non-flammable

Water Based

Water Clean-up

In The Blog:

Why should you acid etch concrete?

Related Products:

Download Nu-EcoSafe Degreaser TDSDownload Nu-EcoSafe Degreaser SDS
Important Notice

The information given in this data sheet is based on many years experience and is correct to the best of our knowledge. However as the use of our product is beyond our control we can only be responsible for the quality of our product at the time of dispatch. For additional information about specifications or application please contact our company. As this information is of a general nature we cannot assume responsibility for individual use.